Instructional Manual for Setting Up the Mars Lander A1 Bitcoin Miner

Click Here to purchase the Mars Lander A1

Introduction

This manual will guide you through the unboxing, setup, and configuration of the Mars Lander A1 Bitcoin Miner. You'll learn how to connect it to your Wi-Fi network, configure your Bitcoin address, and understand the basic features of solo mining.

Unboxing the Mars Lander A1

1. Box Contents:

   • Mars Lander A1 Miner
   • Upgraded power supply
   • Remote control for LEDs
   • Stickers
   • USB adapter and card reader
   • Instruction manual and troubleshooting guide

2. Power Supply:

   • Works globally (110V or 220V)
   • US plug included (adapter may be needed for other countries)

3. Remote Control:

   • Used to control the LEDs on the miner

Setting Up the Mars Lander A1

1. Initial Setup:

   • Remove all protective materials from the miner.
   • Connect the power supply to the back of the Mars Lander A1.

2. Connecting to Wi-Fi:

   • Power on the miner and wait for the screen to show the initiation setup.
   • Connect your phone or computer to the Wi-Fi network named "Mar Lander Setup".
   • Open a browser and navigate to 192.168.5.1.

3. Wi-Fi Configuration:

   • Click "Refresh Wi-Fi" to list available networks.
   • Select your Wi-Fi network, enter the password, and click "Save".
   • Change the Bitcoin address to your own (you can use Coinbase or any other Bitcoin app to get an address).

4. Pool Configuration:

   • You can change the default pool (CK pool) to another pool if you prefer.
   • Click "Save Settings" and wait for the miner to restart and reconfigure.

Advanced Settings

1. Logging In:

   • Use the IP address shown on the miner's screen to log in (e.g., 192.168.1.2.45).
   • Access the advanced settings page.

2. Changing Frequency:

   • The default frequency is 400, but it can be adjusted based on your environment (300-400 ghes is typical).

3. Other Advanced Settings:

   • Safe shutdown: To safely power off the miner and protect the SD card.
   • Restore to defaults: To reset all settings if needed.
   • Monitor chip temperature: Ensure the miner does not overheat.

Troubleshooting

• SD Card: Keep the SD card safe to avoid firmware corruption.
• LED Control: Use the remote to adjust LED settings if they are distracting.
• Wi-Fi Issues: Ensure correct Wi-Fi credentials are entered.
• Bitcoin Address: Double-check your Bitcoin address to ensure you receive payouts.

Example Mining Setup

• My Setup:
  • Two shelves with multiple miners (Chia Miner, Mars Lander A1, VX, and R909).
  • USB ports on the side of the Mars Lander A1 for expanding your setup.

Purchasing Equipment

• All equipment can be purchased from Bitcoin Merch.

Conclusion

With the Mars Lander A1, you can efficiently mine Bitcoin with a simple setup process. Customize your mining experience by adjusting settings and expanding your miner collection for higher hash rates.