Mars Lander V2 Setup Guide

Welcome to Your Mars Lander!

Product Link - https://bitcoinmerch.com/Mars-Lander

Congratulations on your new Mars Lander! This manual will guide you through the setup process to ensure a smooth and efficient start.


Step 1: Unboxing and Initial Setup

  1. Carefully unpeel the protective film from the clear cover of your Mars Lander.
  2. Attach the clear cover to the Mars Lander.
  3. Install one of the SD cards you received on the box into the left side of the Mars Lander. The second one is a backup.
  4. Connect the Mars Lander to a power source using the provided power supply. Our power supply is compatible worldwide, supporting voltages from 110 to 220V.

Step 2: Powering Up and Initial Configuration

  1. Once plugged in, wait for the Mars Lander's screen to activate and display initial instructions.
  2. Follow the on-screen prompts to begin the setup process.

Step 3: Connecting to Wi-Fi
  1. On your computer or smartphone, connect to the "Mars Lander_Setup" Wi-Fi network. This connection might take a few minutes.
  2. If prompted to use the Wi-Fi without internet, select "YES."
    • Tip: Disabling mobile internet on your phone can assist in connecting to the Mars Lander Wi-Fi.

Step 4: Accessing the Setup Page

  1. Once connected to the Mars Lander Setup Wi-Fi, enter 192.168.5.1 in your device's browser.
  2. The Mars Lander setup page should appear. If not, repeat the previous steps or contact our support team for assistance.

Step 5: Configuring Wi-Fi Network

  1. On the setup page, click "Refresh" to display all available 2.4G Wi-Fi networks in your area.
  2. Select your Wi-Fi network and enter the password correctly. Incorrect password entry will prevent the Mars Lander from showing the IP address.

Step 6: Setting Up BTC Address and Pool Connection

  1. Change the default BTC address to your BTC address to receive payouts.
  2. Optionally, you can change the Pool connection to any BTC pool. Note: Some pools require registration and may need a username instead of your BTC address.

Troubleshooting Tips:

  1. Mars Lander Not Powering On: Contact our support team for assistance.
  2. Displaying 0 GH/s: Try resetting the Mars Lander and navigate to the advanced page to reduce the frequency to 400 MH/z. If the issue persists, contact us.
  3. No IP Address: Delete the "DeleteForDefaults" file from the Micro SD card and retry the setup process.
  4. No GH/s Output: Ensure your pool information is correct or revert to default settings.

Need Help? Our support team is ready to assist you with any issues or queries. Don't hesitate to contact us for a seamless experience with your Mars Lander.

For the Mars Lander V1 manual, and SSH with more advanced support Click Here to download the PDF.

Deja un comentario

Todos los comentarios son moderados antes de ser publicados