How to Set Up Your Mini Doge III: A Step-by-Step Guide

Introduction

Welcome to our step-by-step guide on setting up the Mini Doge III. Follow these instructions to ensure your mining setup is done correctly and efficiently.

Step 1: Unboxing Your Mini Doge III

1. Unpack the Mini Doge III: Carefully open the box and remove the Mini Doge III device. Ensure you have all the components:

   • Mini Doge III miner
   • Power supply unit (PSU)
   • Ethernet cable
   • User manual

2. Inspect the Contents: Check all components for any visible damage.

Step 2: Connecting the Hardware

1. Connect the PSU: Plug the power supply unit into the Mini Doge III. Ensure the connection is secure.

2. Connect the Ethernet Cable: Insert one end of the Ethernet cable into the Mini Doge III and the other end into your router or network switch.

Step 3: Powering Up

1. Plug in the PSU: Connect the PSU to a power outlet. The Mini Doge III should power on automatically.

2. Wait for Initialization: Allow a few minutes for the Mini Doge III to boot up and initialize.

Step 4: Accessing the Miner Interface

1. Find the IP Address: Use your router’s web interface to find the IP address assigned to the Mini Doge III. It will usually be listed under connected devices.

2. Open a Web Browser: Enter the IP address into your web browser to access the Mini Doge III's configuration page.

Step 5: Configuring the Miner

1. Login to the Interface: Use the default username and password provided in the user manual to log in.

2. Configure Mining Pool:

   • Navigate to the 'Miner Configuration' tab.
   • Enter your preferred mining pool’s URL.
   • Input your worker name and password (if required).

3. Save Settings: Click ‘Save’ to apply your mining pool settings.

Step 6: Monitoring and Optimization

1. Check Status: Go to the 'Miner Status' tab to check if the miner is running correctly. You should see real-time data on hash rates and other metrics.

2. Adjust Settings: Optimize settings based on performance and temperature readings if necessary.

Conclusion

Congratulations! Your Mini Doge III is now set up and ready to mine. For further assistance, visit our support page or contact our customer service team.