Bombax Ethereum Classic Miner Setup and User Manual

Bombax Product Page

Welcome to the Bombax Ethereum Classic Miner Setup and User Manual. This guide will help you set up your miner quickly and efficiently, ensuring optimal performance for mining Ethereum Classic and ZIL.

Contents

1. Unboxing and Hardware Setup
2. Connecting to the Internet and Power
3. Configuring the Miner on Your Computer
4. Pool Setup and Optimization
5. Monitoring and Maintenance
6. Troubleshooting

1. Unboxing and Hardware Setup

1. Unbox Your Miner:

   • Carefully remove the Bombax Miner from its packaging.
   • Ensure all components are included: Miner unit, power cord, and Ethernet cable.

2. Place the Miner:

   • Choose a suitable location with adequate ventilation.
   • Avoid placing the miner near heat sources or in confined spaces.

2. Connecting to the Internet and Power

1. Connect the Ethernet Cable:

   • Plug one end of the Ethernet cable into the miner's network port.
   • Connect the other end to your router or modem.

2. Connect the Power Cord:

   • Plug the power cord into the miner.
   • Connect the other end to a power outlet.

3. Power On:

   • Turn on the miner using the power switch.

3. Configuring the Miner on Your Computer

1. Access the Miner:

   • Download and install Advanced IP Scanner on your computer.
   • Scan your network to find the miner's IP address (e.g., 192.168.1.21).

2. Login:

   • Open a web browser and enter the miner’s IP address.
   • Use the default credentials to log in (Username: admin, Password: admin).

3. Change Default Settings:

   • Update the default username and password for security.

4. Pool Setup and Optimization

1. Choose Your Pool:

   • We recommend F2 Pool for dual mining Ethereum Classic and Zil.

2. Configure the Pool:

   • Go to the F2 Pool website and find the Ethereum Classic + Zil pool settings.
   • Enter the pool URL and port into the miner’s configuration page.
   • Input your worker username and save the settings.

5. Monitoring and Maintenance

1. Monitor Performance:

   • Regularly check the miner’s performance via the web interface.
   • Ensure it is running at the advertised 3,800 MHz or higher.

2. Routine Checks:

   • Inspect the miner for dust and clean it periodically.
   • Ensure all connections are secure.

6. Troubleshooting

1. Common Issues:

   • Miner not connecting to the internet:
     • Check the Ethernet cable and router.
     • Restart the miner and router.
   • Low performance:
     • Ensure proper ventilation.
     • Verify pool settings and network stability.

2. Support:

   • For additional support, visit Bitcoin Merch Support.

Conclusion

By following this manual, you can ensure your Bombax Ethereum Classic Miner is set up correctly and running efficiently. Happy mining!