COMPAC F COMBO - FULL KIT Instruction Manual

COMPAC F COMBO - FULL KIT Instruction Manual

Introduction: Welcome to the COMPAC F COMBO - FULL KIT, an advanced solution for cryptocurrency mining. This manual will guide you through the setup process to ensure a smooth and efficient mining experience.

Package Contents:

• Raspberry Pi (with pre-installed software)
• Screen, Keyboard, Mouse
• USB Hub
• COMPAC F USB Miners
• Cooling Fans

Initial Setup:

1. Connect Peripherals to Raspberry Pi:

   • Connect the screen, keyboard, and mouse to the Raspberry Pi.
   • Plug in the USB hub to one of the Raspberry Pi's USB ports.

2. Power On:

   • Connect the power adapter to the Raspberry Pi and turn it on.
   • Wait for the Raspberry Pi Desktop to appear on the screen.

3. Access Instructions Manual:

   • Locate the 'Instructions Manual' text folder on the Raspberry Pi Desktop.
   • Open the folder and carefully read the instructions.

Configuration:

1. Connect to Wi-Fi:

   • On the Raspberry Pi Desktop, find and connect to your Wi-Fi network.

2. Run Terminal:

   • Open the Terminal application from the Raspberry Pi Desktop.

3. Enter Code:

   • Copy and paste the two lines of code provided in the Instructions Manual into the Terminal.
   • This will start the cgminer software for mining.

Adding COMPAC F Miners:

1. Attach Cooling Fan:

   • Before connecting each COMPAC F miner, ensure a cooling fan is attached to it.
   • Warning: Running the COMPAC F without a fan can cause damage and void the warranty.

2. Connect Miners:

   • Plug one COMPAC F miner at a time into the USB hub.
   • Wait for the hash rate on the cgminer interface to increase, indicating the miner is operational.
   • Once the hash rate stabilizes, proceed to connect the next miner.

Customizing Mining Settings:

1. Change BTC Address:

   • To use your Bitcoin address, replace the default address in the code with yours before pasting it into the Terminal.
   • Caution: Avoid adding extra spaces or altering the original code to prevent issues.

2. Change Mining Pool:

   • You can switch to a different mining pool.
   • Note that some pools require registration and use a username instead of a BTC address.

Final Steps:

• Once all miners are connected and configured, your COMPAC F COMBO - FULL KIT is ready for mining.
• Monitor the system to ensure it is running smoothly.

Support: For further assistance or inquiries, please contact our support team at BitcoinMerch.com Support.